LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner System -- G37 Convertible >> DTC/Circuit Diagnosis >> Sliding Limit Switch >> Component Inspection

Component Inspection

  1. CHECK SLIDING LIMIT SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect sliding limit switch connector.
    3. Check continuity between sliding limit switch terminals.
      TERMINAL CONTINUITY REFERENCE CHART

      Sliding limit switch Condition Continuity
      Connector Terminal
      B514 4 32 Seat sliding Front edge Existed
      Other than above Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace forward switch (Built in seat back frame). Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals