Work Procedure
- SAVING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "DESCRIPTION ".
NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection".Go to 2.
- REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to "EXPLODED VIEW ".
Go to 3.
- WRITING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "WORK PROCEDURE ".
Go to 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END