LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Audio System, Visual System & Navigation System (Base Audio Without Navigation) - G37 Convertible) >> DTC/Circuit Diagnosis >> Steering Switch Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STEERING SWITCH SIGNAL GND CIRCUIT
    1. Disconnect AV control unit connector and spiral cable connector.
    2. Check continuity between AV control unit harness connector and spiral cable harness connector.
      CONTINUITY REFERENCE CHART

      AV control unit Spiral cable Continuity
      Connector Terminal Connector Terminal
      M201 15 M36 33 Existed

      Is the inspection result normal? 

      YES: Go to 2.

      NO: Repair harness or connector.

  2. CHECK SPIRAL CABLE

    Check spiral cable.

    Is the inspection result normal? 

    YES: Go to 3.

    NO: Replace spiral cable.

  3. CHECK GROUND CIRCUIT
    1. Connect AV control unit connector.
    2. Check continuity between AV control unit harness connector and ground.
      CONTINUITY REFERENCE CHART

      AV control unit Ground Continuity
      Connector Terminal
      M201 15 Existed

      Is the inspection result normal? 

      YES: Go to 4.

      NO: Replace AV control unit. Refer to "EXPLODED VIEW ".

  4. CHECK STEERING SWITCH
    1. Turn ignition switch OFF.
    2. Check steering switch. Refer to "COMPONENT INSPECTION ".

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace steering switch. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals