LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Seat System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Sliding Limit Switch >> Driver Side >> DRIVER SIDE : Component Function Check

DRIVER SIDE : Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "FWD LIMIT SW" in the "Data Monitor" mode using CONSULT-III.
    3. Check the sliding limit switch signal under the following condition.
      TEST ITEM CONDITION CHART

      Test item Condition Status
      FWD LIMIT SW Seat sliding Front edge ON
      Other than above OFF

      Is the indication normal? 

      YES: Sliding limit switch function is OK.

      NO: Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals