LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Seat System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Reclining Switch >> Driver Side >> DRIVER SIDE : Component Function Check

DRIVER SIDE : Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "RECLN SW-FR", "RECLN SW-RR" in the "Data monitor" mode using CONSULT-III.
    3. Check reclining switch signal under the following conditions.
      MONITOR ITEM CONDITION CHART

      Monitor item Condition Status
      RECLINE SW-FR Reclining switch (forward) Operate ON
      Release OFF
      RECLINE SW-RR Reclining switch (backward) Operate ON
      Release OFF

      Is the indication normal? 

      YES: Reclining switch function is OK.

      NO: Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals