LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Seat System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Driver Side >> DRIVER SIDE : Component Function Check

DRIVER SIDE : Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT-III.
    3. Check the power walk-in switch signal under the following condition.
      TEST ITEM CONDITION CHART

      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: Power walk-in switch function is OK.

      NO: Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals