Detail Flow
WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
When performing the sliding, reclining or lifting (rear) operation in manual function, the driver seat control unit performs the seat synchronization function as follows.
CONTROL UNIT CONDITION CHART
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Sensors [Sliding, reclining, lifting (rear)] | - | The driver seat control unit judges the direction and distance of seat movement according to the signal input from each seat sensor during manual operation. |
| 2 | - | Motors (Tilt, telescopic, outside mirror) | Driver seat control unit requests the operation to position according to the direction and distance of seat movement to the automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates each motor. |
| Sensors (Tilt, telescopic, outside mirror) | - | Driver seat control unit stops the operation of each motor when the value of each sensor that is input to automatic drive positioner control unit via UART communication reaches the target address. |