LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Automatic Drive Positioner System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Tilt Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "TILT SEN" in the "Data monitor" mode using CONSULT-III.
    3. Check the tilt sensor signal under the following condition.
      MONITOR ITEM CONDITION CHART

      Monitor item Condition Value
      TILT SEN Tilt position Change between
      1.1 V (Close to top)
      3.9 V (Close to bottom)

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals