LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Automatic Drive Positioner System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Telescopic Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "TELESCO SW-FR", "TELESCO SW-RR" in the "Data monitor" mode using CONSULT-III.
    3. Check telescopic switch signal under the following conditions.
      MONITOR ITEM CONDITION CHART

      Monitor item Condition Status
      TELESCO SW-FR Telescopic switch (forward) Operate ON
      Release OFF
      TELESCO SW-RR Telescopic switch (backward) Operate ON
      Release OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals