LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Automatic Drive Positioner System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Sliding Limit Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "FWD LIMIT SW" in the "Data Monitor" mode using CONSULT-III.
    2. Check the sliding limit switch signal under the following condition.
      TEST ITEM DESCRIPTION CHART

      Test item Condition Status
      FWD LIMIT SW Seat sliding Front edge ON
      Other than above OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals