Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Turn ignition switch ON.
Select "MEMORY SW 1", "MEMORY SW 2" "SET SW" in the "Data monitor" mode using CONSULT-III.

Check seat memory switch signal under the following conditions.

MONITOR ITEM CONDITION CHART

Monitor item	Condition		Status
SET SW	SET SW	Press	ON
SET SW	SET SW	Release	OFF
MEMORY SW 1	Memory switch 1	Press	ON
MEMORY SW 1	Memory switch 1	Release	OFF
MEMORY SW 2	Memory switch 2	Press	ON
MEMORY SW 2	Memory switch 2	Release	OFF

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".