Component Inspection
WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK POWER WALK-IN SWITCH
- Turn ignition switch OFF.
- Disconnect power walk-in switch connector.
- Check continuity between power walk-in switch terminals.TERMINAL CONTINUITY REFERENCE CHART
Power walk-in switch Condition Continuity Connector Terminal B513 30 32 Power walk-in switch Pressed Existed Released Not existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace power walk-in switch (Built in walk-in lever). Refer to "EXPLODED VIEW ".