LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Warning Chime System -- G37 Convertible) >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OPERATION OF METER BUZZER
    1. Connect the CONSULT-III.
    2. Perform "LIGHT WARN ALM" in "ACTIVE TEST" of "BCM (BUZZER)".

      Does meter buzzer beep? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL

    Select the "Data Monitor" of "METER/M&A" and check the "BUZZER" monitor value.

    "BUZZER"

    Under the condition of buzzer input : On

    Except above : Off

    Is the inspection result normal? 

    YES: Replace combination meter.

    NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals