Precaution Necessary for Steering Wheel Rotation after Battery Disconnect: Notes

CAUTION: Comply with the following cautions to prevent any error and malfunction.

Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables.
After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables.

This vehicle is equipped with a push-button ignition switch and a steering lock unit.

If the battery is disconnected or discharged, the steering wheel will lock and cannot be turned.

If turning the steering wheel is required with the battery disconnected or discharged, follow the procedure below before starting the repair operation.