Component Description
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT DESCRIPTION CHART
| Component | Description | |
|---|---|---|
| Blower unit assembly | Intake door motor | "BLOWER UNIT ASSEMBLY : INTAKE DOOR MOTOR " |
| Blower motor | "BLOWER UNIT ASSEMBLY : BLOWER MOTOR " | |
| Heater & cooling unit assembly | Aspirator | "HEATER & COOLING UNIT ASSEMBLY : ASPIRATOR " |
| Intake sensor | "HEATER & COOLING UNIT ASSEMBLY : INTAKE SENSOR " | |
| Air mix door motor (driver side) | "HEATER & COOLING UNIT ASSEMBLY : AIR MIX DOOR MOTOR (DRIVER SIDE) " | |
| Air mix door motor (passenger side) | "HEATER & COOLING UNIT ASSEMBLY : AIR MIX DOOR MOTOR (PASSENGER SIDE) " | |
| Mode door motor | "HEATER & COOLING UNIT ASSEMBLY : MODE DOOR MOTOR " | |
| Upper ventilator door motor | "HEATER & COOLING UNIT ASSEMBLY : UPPER VENTILATOR DOOR MOTOR " | |
| Preset switch | Preset switch is integrated with A/C controller and AV operation switch. A/C switch operation signal is transmitted from preset switch to AV control unit via communication line. Refer to , "COMPONENT PARTS LOCATION " (BOSE audio without navigation) or , "COMPONENT PARTS LOCATION " (BOSE audio with navigation) for detailed installation location. |
|
| Display unit | Display unit indicates operation status of air conditioning. Refer to , "COMPONENT PARTS LOCATION " (BOSE audio without navigation) or , "COMPONENT PARTS LOCATION " (BOSE audio with navigation) for detailed installation location. |
|
| AV control unit | AV control unit transmits A/C switch operation signal to A/C auto amp. via CAN communication line. Refer to , "COMPONENT PARTS LOCATION " (BOSE audio without navigation) or , "COMPONENT PARTS LOCATION " (BOSE audio with navigation) for detailed installation location. |
|
| A/C auto amp. | "A/C AUTO AMP. " | |
| ECM | ECM, when receiving A/C ON signal and blower fan ON signal from A/C auto amp., transmits A/C compressor request signal to IPDM E/R via CAN communication according to status of the engine and refrigerant pressure. ECM transmits engine coolant temperature signal to A/C auto amp. via CAN communication line. Refer to , "ENGINE CONTROL SYSTEM : COMPONENT PARTS LOCATION " for detailed installation location. |
|
| IPDM E/R | A/C relay is integrated in IPDM E/R. IPDM E/R operates A/C relay when receiving A/C compressor request signal from ECM via CAN communication line. Refer to , "COMPONENT PARTS LOCATION " for detailed installation location. |
|
| Ambient sensor | "AMBIENT SENSOR " | |
| In-vehicle sensor | "IN-VEHICLE SENSOR " | |
| Sunload sensor | "SUNLOAD SENSOR " | |
| Refrigerant pressure sensor | "REFRIGERANT PRESSURE SENSOR " | |
| Magnet clutch | "MAGNET CLUTCH " | |