Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Verify DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
3. Touch "ERASE".
4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F. Refer to "DTC LOGIC ".
  Is the DTC B260F displayed again?
  
  YES: GO TO 2.
  
  NO: GO TO 3.
REPLACE ECM
Replace ECM. Refer to , "REMOVAL AND INSTALLATION ".

INSPECTION END
CHECK INTERMITTENT INCIDENT
Refer to , "INTERMITTENT INCIDENT ".

INSPECTION END