LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Brake System) >> On-Vehicle Maintenance >> Brake Fluid >> Draining

Brake Fluid: Draining

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash with water if it gets on a painted surface.
  • Turn the ignition switch OFF and disconnect the ABS actuator and electric unit (control unit) connector or the battery negative terminal before performing work.
  1. Connect a vinyl tube to the bleed valve.
  2. Depress the brake pedal and loosen the bleeder valve to gradually discharge brake fluid.
Fig 1: Draining Brake Fluid
G04876623Courtesy of NISSAN MOTOR CO., U.S.A.