LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (SRS Airbag) >> On-Vehicle Repair >> Diagnosis Sensor Unit >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes.
  • Before disconnecting the air bag diagnosis sensor unit harness connectors, be sure to disconnect the each harness connector of the air bag module and seat belt pre-tensioner to prevent air bag deployment by static electricity and seat belt pre-tensioner operation.
  • Do not use air tools or electric tools for servicing.
scientia non olet · About LEMON Manuals