Component Inspection

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SELECTOR LEVER POSITION INDICATOR

Check that selector lever position indicator lamps turn on.

CAUTION: Connect the fuse between the terminals when applying the voltage.

FUSE STATUS CHART

(+) (fuse)		(-)		Condition	Status
Selector lever position indicator connector
Connector	Terminal	Connector	Terminal
M221	2	M221	7	Apply 12 V direct current between terminals 2 and 7.	"N" position indicator lamp turns on.
	3			Apply 12 V direct current between terminals 3 and 7.	"D" position indicator lamp turns on.
	4			Apply 12 V direct current between terminals 4 and 7.	"R" position indicator lamp turns on.
	5			Apply 12 V direct current between terminals 5 and 7.	"P" position indicator lamp turns on.
	6		9	Apply 12 V direct current between terminals 6 and 9.	"M" mode indicator lamp turns on.
	10		11	Apply 12 V direct current between terminals 10 and 11.	Illumination lamp turns on.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace the selector lever position indicator. Refer to "2WD : EXPLODED VIEW " (2WD), "AWD : EXPLODED VIEW " (AWD).