Work Step

When removing instrument panel assembly, combination meter, AV control unit, and center console assembly take steps in the order shown by the number below in table.

PARTS DESCRIPTION

PARTS	INSTRUMENT PANEL ASSEMBLY	COMBINATION METER	AV CONTROL UNIT	CENTER CONSOLE ASSEMBLY
Console finisher assembly	[1]		[1]	[1]
Console center finisher	[2]			[2]
Console rear finisher	[3]			[3]
Rear ventilator duct 2	[4]			[4]
Center console assembly	[5]			[5]
Instrument side finisher LH	[6]
Instrument lower panel LH	[7]
Driver air bag module	[8]
Steering wheel	[9]
Steering column cover	[10]	[1]
Combination switch	[11]	[2]
Spiral cable	[12]
Cluster lid A (upper)	[13]	[3]
Cluster lid A	[14]	[4]
Combination meter	[15]	[5]
Front body side welt LH	[16]
Front pillar garnish LH	[17]
Speaker grille LH	[18]
Center speaker grille	[19]
Center speaker	[20]
Instrument side panel LH	[21]
Inside key antenna	[22]
Cluster lid C	[23]		[2]
Cluster lid D	[24]		[3]
Display unit	[25]		[4]
AV control unit	[26]		[5]
Push button ignition switch	[27]
Front defroster grille LH	[28]
Front defroster grille RH	[29]
Instrument side finisher RH	[30]
Glove box assembly	[31]
Instrument lower cover	[32]
Instrument lower panel RH	[33]
Instrument side panel RH	[34]
Passenger air bag module connector and mounting bolt	[35]
Front body side welt RH	[36]
Front pillar garnish RH	[37]
Speaker grille RH	[38]
Instrument panel assembly	[39]
[]: Number indicates step in removal procedures.

WARNING: Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.

CAUTION: When removing, always use a remover tool that is made of plastic.