Inspection Procedure

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CONNECTOR

Turn ignition switch OFF and disconnect ABS actuator and electric unit (control unit) connector E30, check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal.

Reconnect connector and perform self-diagnosis.

SELF-DIAGNOSIS RESULTS

Self-diagnosis results
CAN COMM CIRCUIT
ST ANG SEN COM CIR
ACC COMM CIRCUIT (Note)
NOTE: Indicated only for vehicles with ICC.

Is above displayed on the self-diagnosis display?

Yes: Print out self-diagnosis results and go to Refer to CAN SYSTEM SPECIFICATION TABLE .

No: INSPECTION END