LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case) >> Service Information >> Transfer Fluid >> Replacement >> Draining

Transfer Fluid: Replacement: Draining

WARNING: This page is about a different variant/trim than selected.
  1. Run the vehicle to warm up the transfer unit sufficiently.
  2. Stop the engine, and remove the drain plug to drain the transfer fluid.
    CAUTION: When draining fluid, protect exhaust tube flange with cover.
  3. Apply sealant to drain plug. Install drain plug on transfer and tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    • Use Genuine Silicone RTV or equivalent. Refer to "RECOMMENDED CHEMICAL PRODUCT AND SEALANT ".
      CAUTION: Remove old sealant adhering to mounting surfaces. Also remove any moisture, oil, or foreign material adhering to application and mounting surfaces.
      Fig 1: Identifying Drain Plug
      G05227907Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals