LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Door Lock) >> Unlock Warning Switch >> Removal

Unlock Warning Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See REMOVAL )
  2. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See REMOVAL )
  3. REMOVE UNLOCK WARNING SWITCH ASSEMBLY 
    1. Disconnect the unlock warning switch connector.
      2. Fig 1: Identifying Unlock Warning Switch Connector
      G05161117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 3 claws and remove the cover.
    3. Remove the contact pin cap.
    4. Remove the unlock warning switch.
      Fig 2: Identifying Unlock Warning Switch
      G05161118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals