LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Engine Control System - System And Component Testing) >> On-Vehicle Repair >> EVAP Canister >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift up the vehicle.
  2. Remove EVAP canister fixing bolt.
  3. Remove EVAP canister.
NOTE: The EVAP canister vent control valve and EVAP canister system pressure sensor can be removed without removing the EVAP canister.
scientia non olet · About LEMON Manuals