LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Service Specifications) >> 3UR-FE Engine Cooling System >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Cylinder block drain cock plug 

CYLINDER BLOCK DRAIN COCK PLUG TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Cylinder block drain cock plug LH and RH x Cylinder block 13 133 10

Water pump 

WATER PUMP TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Water pump x Timing chain cover for 12 mm head (Long) 23 235 17
for 12 mm head (short) 20 204 15
for 14 mm head 47 479 35
Water pump pulley x Water pump 21 214 15
Water inlet housing x Timing chain cover 21 214 15
Air tube bracket x Cylinder head RH 10 102 7
Water by-pass pipe x Timing chain cover and Front water by-pass joint 10 102 7

Thermostat 

THERMOSTAT TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Water inlet with thermostat x Water inlet housing 10 102 7
Air tube bracket x Cylinder head RH 10 102 7

Fan 

FAN TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Fan x Fluid coupling 10 102 7

Radiator 

RADIATOR TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Radiator bracket LH and RH x Radiator tank upper and Radiator tank lower 13 133 10
Radiator x Radiator support 18 184 13
Fan shroud x Radiator 6.5 66 58 in.*lbf
Fluid coupling x Fan pulley 21 214 15