LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Rear Final Drive) >> Preparation >> Special Service Tools

Special Service Tools

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS SPECIFICATION

Tool number
(Kent-Moore No.)
Tool name		 Description
KV381054S0
(J-34286)
Puller
G04875581Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing front oil seal
ST30720000
(J-25405)
Drift
  1. 77 mm (3.03 in) dia.
  2. 55.5 mm (2.185 in) dia.
G04876263Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing front oil seal
  • Installing pinion rear bearing outer race
KV40104100
( - )
Attachment
G04876264Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing side flange (For VQ35DE models)
KV40101000
( - )
Attachment
G04899105Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing side flange (For VK45DE models)
ST36230000
(J-25840-A)
Sliding hammer
G04876265Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing side flange
KV38100200
(J-26233)
Drift
  1. 65 mm (2.56 in) dia.
  2. 49 mm (1.93 in) dia.
G04876266Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side oil seal
KV38107900
(J-39352)
Protector
G04876267Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side flange
KV38100800
(J-25604-01)
Attachment
  1. 541 mm (21.30 in)
  2. 200 mm (7.87 in)
G04876268Courtesy of NISSAN MOTOR CO., U.S.A.
 Fixing unit assembly
ST3127S000
(J-25765-A)
Preload gauge
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000

    ( - )

    Socket adapter (1/2")

  3. HT62900000

    ( - )

    Socket adapter (3/8")
G04876269Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring pinion bearing preload and total preload
KV10111100
(J-37228)
Seal cutter
G04876270Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing rear cover
ST3306S001
(J-22888-D)
Differential side bearing puller set
  1. ST33051001

    (J-22888-20)

    Puller

  2. ST33061000

    (J-8107-2)

    Base

    1. 28.5 mm (1.122 in) dia.
    2. 38 mm (1.50 in) dia.
G04876271Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing side bearing inner race
ST30031000
(J-22912-01)
Replacer
G04876272Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing pinion rear bearing inner race
KV40105230
( - )
Drift
  1. 92 mm (3.62 in) dia.
  2. 86 mm (3.39 in) dia.
  3. 45 mm (1.77 in) dia.
G04876273Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing pinion rear bearing outer race
ST30613000
(J-25742-3)
Drift
  1. 72 mm (2.83 in) dia.
  2. 48 mm (1.89 in) dia.
G04876274Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing pinion front bearing outer race
ST30611000
(J-25742-1)
Drift bar
G04876275Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing pinion front bearing outer race (Use with ST30613000)
ST30901000
(J-26010-01)
Drift
  1. 79 mm (3.11 in) dia.
  2. 45 mm (1.77 in) dia.
  3. 35.2 mm (1.386 in) dia.
G04876276Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing pinion rear bearing inner race
KV38100300
(J-25523)
Drift
  1. 54 mm (2.13 in) dia.
  2. 46 mm (1.81 in) dia.
  3. 32 mm (1.26 in) dia.
G05211505Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing inner race
(J-8129)
Spring gauge
G04876278Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring turning torque
(J-34309)
Differential shim selector tool
G04876279Courtesy of NISSAN MOTOR CO., U.S.A.
 Adjusting bearing preload and pinion gear height
(J-25269-4)
Side bearing disc (2 Req'd)
G04876280Courtesy of NISSAN MOTOR CO., U.S.A.
 Selecting pinion height adjusting washer
scientia non olet · About LEMON Manuals