Freeze Frame Data and 1st Trip Freeze Frame Data
FREEZE FRAME DATA ITEM CHART
| Freeze frame data item |
Description |
| DIAG TROUBLE CODE [PXXXX] |
|
| CAL/LD VALUE [%] |
- The calculated load value at the moment a malfunction is detected is displayed.
|
| COOLANT TEMP [°C] or [°F] |
- The engine coolant temperature at the moment a malfunction is detected is displayed.
|
| L-FUEL TRM-B1 [%] |
- "Long-term fuel trim" at the moment a malfunction is detected is displayed.
- The "long-term fuel trim" indicates much more gradual feedback compensation to the base fuel schedule than "short-term fuel trim".
|
| L-FUEL TRM-B2 [%] |
| S-FUEL TRM-B1 [%] |
- "Short-term fuel trim" at the moment a malfunction is detected is displayed.
- The "short-term fuel trim" indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
|
| S-FUEL TRM-B2 [%] |
| ENGINE SPEED [RPM] |
- The engine speed at the moment a malfunction is detected is displayed.
|
| VEHICL SPEED [km/h] or [mph] |
- The vehicle speed at the moment a malfunction is detected is displayed.
|
| ABSOL TH.P/S [%] |
- The throttle valve opening angle at the moment a malfunction is detected is displayed.
|
| B/FUEL SCHDL [msec] |
- The base fuel schedule at the moment a malfunction is detected is displayed.
|
| INT/A TEMP SE [°C] or [°F] |
- The intake air temperature at the moment a malfunction is detected is displayed.
|
| FUEL SYS-B1 |
- "Fuel injection system status" at the moment a malfunction is detected is displayed.
- One of the following mode is displayed.
Mode2: Open loop due to detected system malfunctionMode3: Open loop due to driving conditions (power enrichment, deceleration enleanment)Mode4: Closed loop - using oxygen sensor(s) as feedback for fuel controlMode5: Open loop - has not yet satisfied condition to go to closed loop |
| FUEL SYS-B2 |
| INT MANI PRES [kPa] |
- These items are displayed but are not applicable to this model.
|
| COMBUST CONDITION |