LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 82 (Power Window Control System -- G37 Sedan) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery negative terminal or power window control unit connector. Reconnect it after a minute or more.
  2. Turn ignition switch ON.
  3. Operate power window switch to fully open door glass. (This operation is unnecessary if door glass is already fully open.)
  4. Pull and hold power window switch UP (AUTO-UP operation). Even after door glass stops at the fully closed position, pull the switch for 2 seconds or more.
  5. Initialization procedure is complete.
  6. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals