General Specifications
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA AND SPECIFICATIONS CHART
| Applied model | MR16DDTi | |
| Transfer model | TY21B | |
| Oil capacity (Approx.) | l (US pt, lmp pt) | 0.37 (3/4, 5/8) |
| Gear ratio | 0.404 | |
| Number of teeth | Ring gear | 42 |
| Drive pinion | 17 | |
SERVICE DATA AND SPECIFICATIONS
| Applied model | MR16DDTi | |
| Propeller shaft model | 3Fø16-ETJ75 | |
| Number of joints | 3 | |
| Shaft length | 1st (Spider to CVJ joint center) | 1051 mm (41.38 in) |
| 2nd (CVJ joint center to spider) | 1000 mm (39.37 in) | |
| Shaft outer diameter | 1st | 57 mm (2.500 in) |
| 2nd | 75 mm (2.95 in) | |
| Type of journal bearings (Non-disassembly type) | 1st joint | Sell type |
| 2nd joint | CVJ type | |
| 3rd joint | Shell type | |
| Coupling method | Transfer side | Flange type |
| Rear final drive side | Flange type | |