Check before Engine Is Started

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT INDICATOR LAMP
1. Park vehicle on flat surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF. Wait at least 5 seconds.
4. Turn ignition switch ON. (Do not start engine.)
  Is shift position indicator activated for about 2 seconds?
  
  YES:
  1. Turn ignition switch OFF.
  2. Perform self-diagnosis and note NG items.
    Refer to , "CONSULT-III FUNCTION (TRANSMISSION) ".
  3. Go to , "CHECK AT IDLE ".
  NO: Stop "Road Test". Refer to , "SYMPTOM TABLE ".