Detailed Flow

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using diagnosis worksheet. Refer to , "DIAGNOSTIC WORK SHEET ".

GO TO 2.
CHECK SYMPTOM 1
Check the following items based on the information obtained from the customer.
- Fail-safe. Refer to , "FAIL-SAFE ".
- CVT fluid inspection. Refer to , "INSPECTION ".
- Line pressure test. Refer to , "INSPECTION AND JUDGMENT ".
- Stall test. Refer to , "INSPECTION AND JUDGMENT ".
  GO TO 3.
CHECK DTC
1. Check DTC.
2. Perform the following procedure if DTC is detected.
  - Record DTC.
  - Erase DTC. Refer to , "DIAGNOSIS DESCRIPTION ".
    Is any DTC detected?
    
    YES: GO TO 4.
    
    NO: GO TO 5.
PERFORM DIAGNOSTIC PROCEDURE
Perform "Diagnostic Procedure" for the displayed DTC.

GO TO 5.
PERFORM DTC CONFIRMATION PROCEDURE
Perform "DTC CONFIRMATION PROCEDURE" for the displayed DTC.

Is DTC detected?

YES: GO TO 4.

NO: GO TO 6.
CHECK SYMPTOM 2
Confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 7.

NO: INSPECTION END
RODE TEST
Perform "RODE TEST". Refer to , "DESCRIPTION ".

GO TO 8.
CHECK SYMPTOM 3
Confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 2.

NO: INSPECTION END