LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Power Steering System) >> Service Data And Specifications (SDS) >> Service Data And Specifications (SDS) >> Steering Outer Socket and Inner Socket

Steering Outer Socket and Inner Socket

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
STEERING OUTER SOCKET AND INNER SOCKET SPECIFICATIONS AND SERVICE DATA

Steering gear type PR26AM
G04902334Courtesy of NISSAN MOTOR CO., U.S.A.
Tie-rod ball joint outer socket Swinging torque 0.3 - 2.9 N.m (0.03 - 0.29 kg-m, 3 - 25 in-lb)
Measurement on spring balance (F)
  • Measuring point: cotter pin hole of stud
4.84 - 46.7 N (0.50 - 4.7 kg-f, 4 - 34 lb-f)
Rotating torque 0.3 - 2.9 N.m (0.03 - 0.29 kg-m, 3 - 25 in-lb)
Axial end play 0.5 mm (0.020 in) or less
Tie-rod ball joint inner socket Swinging torque 1.0 - 7.8 N.m (0.11 - 0.79 kg-m, 9 - 69 in-lb)
Measurement on spring balance
  • Measuring point: L mark see above figure, L=83.2 mm (3.276 in).
12.1 - 93.7 N (1.3 - 9.5 kg-f, 9 - 69 lb-f)
Axial end play 0.2 mm (0.008 in) or less