LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Automatic Transmission) >> Unit Disassembly And Assembly >> Assembly >> Adjustment >> Total End Play

Total End Play

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure dimensions "K" and "L" and then calculate dimension "J".
    Fig 2: Measuring Dimensions K, L And J
    G04901370Courtesy of NISSAN MOTOR CO., U.S.A.
    1. Measure dimension "K".
      Fig 3: Measuring Dimension K
      G04901371Courtesy of NISSAN MOTOR CO., U.S.A.
    2. Measure dimension "L".
    3. Calculate dimension "J".

      "J": Distance between oil pump fitting surface of transmission case and needle bearing mating surface of front sun gear. 

      J = K - L 

      Fig 4: Measuring Dimension L
      G04876208Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Measure dimensions "M1" and "M2" and then calculate dimension "M".
    Fig 5: Measuring Dimensions M1, M2 And M
    G04876209Courtesy of NISSAN MOTOR CO., U.S.A.
    1. Place bearing race and needle bearing on oil pump assembly.
      Fig 6: Identifying Bearing Race And Needle Bearing On Oil Pump Assembly
      G04876210Courtesy of NISSAN MOTOR CO., U.S.A.
    2. Measure dimension "M1".
      Fig 7: Measuring Dimension M1
      G04876211Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Measure dimension "M2".
      Fig 8: Measuring Dimension M2
      G04876212Courtesy of NISSAN MOTOR CO., U.S.A.
    4. Calculate dimension "M".

      "M": Distance between transmission case fitting surface of oil pump and needle bearing on oil pump. 

      M = M1 - M2 

      Fig 9: Measuring Distance Between Transmission Case Fitting Surface Of Oil Pump And Needle Bearing On Oil Pump
      G04876209Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Adjust total end play "T1".

    T1 = J - M 

    Total end play "T1" : 0.25 - 0.55 mm (0.0098 - 0.0217 in) 

    • Select proper thickness of bearing race so that total end play is within specifications.

      Bearing races : Refer to  "GENERAL SPECIFICATION ".

      Fig 10: Measuring Total End Play
      G04876205Courtesy of NISSAN MOTOR CO., U.S.A.