LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P100A Through P2A03 >> DTC P1564: ICC Steering Switch >> Component Inspection

Component Inspection

  1. CHECK ICC STEERING SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect combination switch (spiral cable) harness connector M303.
    3. Check resistance between combination switch harness connector terminals under the following conditions.
      TERMINAL RESISTANCE REFERENCE CHART

      Combination switch Condition Resistance (Ω)
      Connector Terminals
      M303 13 and 16 MAIN switch: Pressed Approx. 0
      CANCEL switch: Pressed Approx. 310
      DISTANCE switch: Pressed Approx. 740
      SET/COAST switch: Pressed Approx. 1, 400
      RESUME/ACCELERATE switch: Pressed Approx. 2, 600
      All ICC steering switches: Released Approx. 5, 500

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ICC steering switch

scientia non olet · About LEMON Manuals