Malfunction Indicator Lamp (Mil): Description
WARNING: This page is about a different car, the 2010 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
The MIL is located on the combination meter.
- The MIL will illuminate when the ignition switch is turned ON without the engine running. This is a bulb check.
If the MIL does not illuminate, check MIL circuit. Refer to COMPONENT FUNCTION CHECK .
- When the engine is started, the MIL should turn off.
If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.