LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> FX50 >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner >> Component Diagnosis >> Telescopic Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "TELESCO SEN" in "Data monitor" mode with CONSULT-III.
    3. Check the tilt sensor signal under the following conditions.
    DATA MONITOR REFERENCE

    Monitor item Condition Value
    TELESCO SEN Telescopic position Change between 0.8 [V] (close to top)
    3.4 [V] (close to bottom)

    Is the indication normal? 

    YES: INSPECTION END.

    NO: Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals