LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> FX50 >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner >> Component Diagnosis >> Sliding Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "SLIDE SW-FR", "SLIDE SW-RR" in "Data monitor" mode with CONSULT-III.
    3. Check sliding switch signal under the following conditions.
    DATA MONITOR REFERENCE

    Monitor item Condition Status
    SLIDE SW-FR Sliding switch (forward) Operate ON
    Release OFF
    SLIDE SW-RR Sliding switch (backward) Operate ON
    Release OFF

    Is the indication normal? 

    YES: INSPECTION END

    NO: Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals