Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS

Tool number (Kent-Moore No.) Tool name		Description
ST27862000 (-) Drift 62.5 mm (2.461 in) dia. 42 mm (1.65 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front oil seal
KV381054S0 (J-34286) Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear oil seal
ST30720000 (J-25405) Drift 77 mm (3.03 in) dia. 55.5 mm (2.185 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing rear oil seal Installing mainshaft oil seal
KV40104830 (-) Drift 70 mm (2.76 in) dia. 63.5 mm (2.500 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing rear oil seal
KV38100300 (J-25523) Drift 54 mm (2.13 in) dia. 46 mm (1.81 in) dia. 32 mm (1.26 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft bearing
ST33052000 (-) Drift 28 mm (1.10 in) dia. 22 mm (0.87 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft assembly
ST30611000 (J-25742-1) Drift bar 350 mm (13.78 in) 25 mm (0.98 in) dia. M12 x 1.5P	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear bearing
ST35321000 (-) Drift 49 mm (1.93 in) dia. 41 mm (1.61 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear bearing Installing mainshaft assembly
KV38104010 (-) Drift 67 mm (2.64 in) dia. 49 mm (1.93 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft rear bearing Installing rear bearing
ST30621000 (J-25742-5) Drift 80 mm (3.15 in) dia. 59 mm (2.32 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing mainshaft bearing
ST31214000 (J-25269-B) Drift 34 mm (1.34 in) dia. 25.5 mm (1.004 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing front drive shaft front bearing Removing front drive shaft rear bearing
ST33200000 (J-26082) Drift 60 mm (2.36 in) dia. 44.5 mm (1.752 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft front bearing