LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> On-Vehicle Maintenance >> Transfer Fluid >> Inspection >> Fluid Level

Fluid Level

  1. Remove filler plug (1) and gasket. Then check that fluid is filled up from mounting hole for the filler plug.
    CAUTION: Never start engine while checking fluid level.
  2. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".
    CAUTION: Never reuse gasket.
    Fig 1: Inspecting Fluid Level
    G05224027Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals