LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Disassembly And Assembly >> Front Drive Shaft And Drive Chain >> Assembly

Front Drive Shaft And Drive Chain: Assembly

  1. Install front drive shaft front bearing with the drift (A) [SST: ST33200000 (J-26082)].
    Fig 1: Installing Front Drive Shaft Front Bearing With Drift
    G05727232Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install front drive shaft rear bearing with the drift (A) [SST: KV38104010 (-)].
    Fig 2: Installing Front Drive Shaft Rear Bearing With Drift
    G06301758Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Install drive chain to front drive shaft.
    CAUTION: Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.
    Fig 3: Identifying Identification Mark Of Drive Chain
    G05727203Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Install drive chain to mainshaft, and then install by tapping front drive shaft with plastic hammer. Press-fit rear bearing of front drive shaft to rear case.
    CAUTION: Never tap drive chain.
  5. Install front case to rear case. Refer to "ASSEMBLY ".
    Fig 4: Tapping Front Drive Shaft With Plastic Hammer
    G05225363Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals