DTC CONFIRMATION PROCEDURE (Without CONSULT-III)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
- IGNITION SWITCH
Turn ignition switch ON.
GO TO 2
- IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
GO TO 3
- WAIT TIME
Wait more than 3 seconds.
GO TO 4
- REPEAT STEPS
GO TO 5
- IGNITION SWITCH
Turn ignition switch ON.
GO TO 6
- DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to "TROUBLE DIAGNOSIS WITHOUT CONSULT-III ".
END