Special Service Tools

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS DESCRIPTION

Tool number (Kent-Moore No.) Tool name		Description
HT72520000 (J-25730-A) Ball joint remover a: 33 mm (1.30 in) b: 50 mm (1.97 in) r: 11.5 mm (0.453 in)	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing steering outer socket Removing transverse link

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS DESCRIPTION

Tool number (Kent-Moore No.) Tool name		Description
HT72520000 (J-25730-A) Ball joint remover a: 33 mm (1.30 in) b: 50 mm (1.97 in) r: 11.5 mm (0.453 in)	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing steering outer socket Removing transverse link
KV40107300 ( - ) Boot band crimping tool	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing boot band
KV38107900 ( - ) Protector a: 32 mm (1.26 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing drive shaft
KV38100500 ( - ) Drift a: 80 mm (3.15 in) dia. b: 60 mm (2.36 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing drive shaft plug
KV38102200 ( - ) Drift a: 90 mm (3.54 in) dia. b: 31 mm (1.22 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing drive shaft plug