Lighting Switch Signal Inspection

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BCM INPUT SIGNAL
1. Select "BCM" on CONSULT-III.
2. With "DATA MONITOR" of "BUZZER", confirm "LIGHT SW 1ST" when the lighting switch is operated.
  "LIGHT SW 1ST"
  
  Lighting switch ON (1st position) : ON
  
  Lighting switch OFF : OFF
OK or NG

OK: INSPECTION END

NG: Check the lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".