LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Transfer Case) >> Transfer Fluid >> Replacement >> Filling

Transfer Fluid: Replacement: Filling

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove filler plug and add transfer fluid until fluid level reaches the specified limit near filler plug mounting hole.

    Fluid Capacity 

    : Approx. 1.25 l (2-5/8 US pt, 2-1/4 lmp pt) 

    Fig 1: Identifying Filler Plug
    G05225308Courtesy of NISSAN MOTOR CO., U.S.A.
    CAUTION: Carefully fill the fluid. (Fill up for approx. 3 minutes.)
  2. Leave the vehicle for 3 minutes, and check the fluid level again.
  3. Set a new gasket onto filler plug and install it on transfer and tighten to the specified torque. Refer to "COMPONENTS ".
CAUTION: Do not reuse gasket.
scientia non olet · About LEMON Manuals