Inner Rear View Mirror: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
1. Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
  
  Fig 1: Identifying Inner Rear View Mirror Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 1.6 N*m (16 kgf*cm, 14 in.*lbf)
2. Connect the connector.
3. Attach the 2 claws to install the inner rear view mirror cover.
  
  Fig 2: Identifying Inner Rear View Mirror Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
1. Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
  
  Fig 3: Identifying Inner Rear View Mirror Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 1.6 N*m (16 kgf*cm, 14 in.*lbf)