Stereo Component Amplifier: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE FRONT SEAT ASSEMBLY RH
1. for Manual Seat:
  Remove the front seat RH (see REMOVAL ).
2. for Power Seat:
  Remove the front seat RH (see REMOVAL ).
REMOVE AUDIO AMPLIFIER COVER
1. Detach the 3 clips and remove the cover.
  
  Fig 1: Locating Audio Amplifier Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Disconnect the 3 connectors.
2. Remove the 3 bolts and amplifier.
  
  Fig 2: Locating Stereo Component Amplifier Assembly Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002