Front Shock Absorber: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT WHEEL
REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING LH

Fig 1: Identifying Shock Absorber Lower Side Nut And Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Remove the nut and bolt from the shock absorber lower side.
  NOTE: To prevent the shock absorber with coil spring from falling, leave the bolt inserted.
2. Remove the 4 nuts.
3. Remove the bolt (lower side) and shock absorber with coil spring.