LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting System) >> Turn Signal Flasher Assembly >> Removal

Turn Signal Flasher Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)  (See REMOVAL )
  2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab)  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  4. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT  (See REMOVAL )
  7. REMOVE TURN SIGNAL FLASHER ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the nut and flasher.
      Fig 1: Identifying Turn Signal Flasher Assembly Connector Terminals
      G05160965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals