LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting System) >> Ignition Key Cylinder Light >> Installation

Ignition Key Cylinder Light: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL IGNITION KEY CYLINDER LIGHT 
    1. Connect the connector.
    2. Attach the 2 claws to install the key cylinder light.
    3. Connect the unlock warning switch connector.
      4. Fig 1: Locating Unlock Warning Switch Connector
      G05160908Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL UPPER STEERING COLUMN COVER  (See INSTALLATION )
  3. INSTALL LOWER STEERING COLUMN COVER  (See INSTALLATION )
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
scientia non olet · About LEMON Manuals