LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting System) >> High Mounted Stop Light Assembly >> Reassembly

High Mounted Stop Light Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LIGHT BULB 
    1. Install the bulb to the socket.
      2. Fig 1: Locating Light Bulb
      G05160858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Insert the bulb/socket unit into the stop light.
    3. Turn the bulb/socket unit in the direction indicated by the arrow to install it.
  2. INSTALL HIGH MOUNTED STOP LIGHT LENS 

    HINT:

    Perform these procedures only when replacing the bulb.

    1. Install the 3 bulbs.
      2. Fig 2: Identifying High Mounted Stop Light Bulbs
      G05160856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install a new gasket.

      HINT:

      Only perform this procedure if the gasket was removed.

    3. Install the lens with the 4 screws.
      4. Fig 3: Identifying High Mounted Stop Light Lens Screws
      G05160855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals